For owners searching for USB navigation for the 2019 Toyota RAV4, the relevant GCH product is the ANYAPP ANYTIME USB navigation and streaming module. This article explains what the kit does, what it connects to, and the one condition the listing places on fitment.
The factory system it works with
Toyota's own press materials state that every 2019 RAV4 shipped with the Entune 3.0 Audio system with Apple CarPlay compatibility. The base system uses a 7-inch touchscreen. The Entune 3.0 Audio Plus upgrade, offered on the XLE, and the Entune 3.0 Premium Audio with Dynamic Navigation, offered on the Adventure and Limited grades, both use an 8-inch touchscreen. The sources reviewed for this article describe Apple CarPlay for the 2019 model year and do not report Android Auto for it; Toyota added Android Auto in a later model year, so check your own vehicle.
This matters because the GCH kit does not replace the factory radio. According to the product listing, it communicates through the standardized data platform normally used for smartphone interfacing, and the listing states that the vehicle must have factory-equipped Apple CarPlay for the kit to function. If your RAV4's screen shows a CarPlay option in its settings or menu, that condition is met in principle; if you are unsure, confirm with GCH before ordering.
What the kit adds
The product listing describes the following capabilities:
- Built-in iGO Primo GPS maps covering the U.S. and Canada, with no phone or Wi-Fi connection required for navigation.
- Preloaded streaming apps and access to the Google Play store; streaming services require a Wi-Fi hotspot or the optional SIM card slot.
- Split-screen operation for viewing more than one function at once.
- Conversion of CarPlay and Android Auto from wired to wireless.
- Built-in phone casting for Android and Apple devices.
- A SIM card slot, which the listing says lets the unit operate as a fully standalone device.
- A 3-year warranty, as stated on the listing.
The listing also describes the installation as taking under 30 seconds, since the module plugs in through the vehicle's USB connection rather than requiring panel removal or wiring splices. Individual experience will vary by vehicle and setup.
Fitment: which model years
The product is titled for the 2019 and newer Toyota RAV4, and the listing is tagged for the 2019, 2020 and 2021 model years. The listing does not confirm later trims or years beyond that, so owners of a 2022 or newer RAV4 should contact GCH to confirm compatibility before purchase. The same applies to any trim where you are not certain the factory CarPlay system is present.
How it differs from other upgrade paths
A plug-in USB module is one of several ways to add navigation. Replacing the head unit changes the dash appearance and can disturb factory integration, while a USB module leaves the factory screen and controls in place. The trade-off is that the module depends on the factory CarPlay connection being present and working. Neither approach is universally better; the right choice depends on how much of the factory system you want to keep.
Frequently asked questions
Does my 2019 RAV4 need a factory navigation package?
According to the listing, the requirement is factory-equipped Apple CarPlay, not factory navigation. The kit supplies its own maps.
Will it work without my phone?
The listing states the device operates independently of a smartphone or Wi-Fi for GPS navigation. Streaming and app downloads need a connection, such as a Wi-Fi hotspot.
Is this the same as wireless CarPlay?
It includes wireless conversion of CarPlay and Android Auto, but it also adds its own navigation and app platform, so it does more than a wireless adapter.
Next step
View the full listing for the ANYAPP ANYTIME USB Navigation + Streaming for the 2019+ Toyota RAV4, or contact GCH with your vehicle's year and trim to confirm fitment before ordering.